TLKNET-6420 DVB-T2 modulator is our new product developed complying with the DVB-T2 standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible toprovide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold. It has been designed to provide a cost effective and high quality solution for broadcast network operators, system integrators and transmitter manufacturers aiming to deploy digital TV services over DVB-T2 networks in MFN environments. TLKNET-6420 single Physical Layer Pipes (PLPs), MFN operation, and SISO/MISO transmission through its ASI and IP port. Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T2 STB. Features - Fully complying with ENC302755 standard - 2*ASI input ports - 2* ASI output ports - all 4 inputs ports are hot backup - TS over 2* IP input (UDP) - 10MHz input/loop out, 1PPS input/loop out - DVB-T2 RF output - Supports single PLP - MISO and SISO supported - Support QPSK/16QAM/64QAM/256QAM (normal or rotated) - Support TS format: TS (Mode A) - High performance output: MER>43dB, shoulder level>56dB - Output signal bandwidth: 5M, 6M, 7M, 8MHz - Support MFN net mode - Supports non-linear digital pre-distortion (DPD) - RF output level: -15 ~ 5 dBm, 0.1db stepping - Constant temperature crystal oscillator, as high as 0.1ppm stability - Support online upgrade - Keyboard operation and LCD display - Web Network management system (GUI) Application - MFN transmissions (SFN wuth input reference) - DVB-T2 digital TV broadcast - SISO/MISO transmission - Single PLP broadcasting - Regional TV distribution - DTT transmitters integration Technical Specification Inputs : - ASI : 2 x ASI input over ASI input ports Compliant with EN 50083 ASI interface standard, 1 channel TS input over ASI - Connector Type BNC female, impedance 75Ohm - TS input over IP: MPEG TS UDP protocol, 100 Mbps Ethernet port, IGMP: ver2/ver3, Max rate ≤85M, 10MHz reference clock input, and loop out, BNC interface, 1PPS input and loop out RF Out - Connector N Type, 50Ω Impedance - RF range 150 ~ 862Mhz (step 0.01 Hz) - Output level ATT -15 ~ 5 dBm, (step 0,1 dB) - MER > 43db in the whole band - Shoulder Level >56dB - TS Config IP/ASI - Ref cik select Inter/Exter - Output mod SISO /MISO - Guard interval 1/32, 1/16, 1/8 , 1/4 - RF bandwidth 5/6/7/8 M - Pilot pattern PP4 /PP7 - RF level offset normal, invert, modulation - RF output Modulation/single-tone Modulation - Standard EN302 755 - Mode A multiple-PLP (Option) - PLP Constellation QPSK, 16QAM, 64QAM, 256QAM (Normal or Rotated) - PLP Transmission Mode HEM/NM - PLP LDPC Size 16K/64K - PLP Code Rate 1/2, 3/5, 2/3,3/4, 4/5, 5/6 - PLP Constellation QPSK, 16QAM, 64QAM, 256QAM - L1 Constellation BPSK, QPSK, 16QAM, 64QAM - FEC Length Short(16K), Normal (64K) - FEC Rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 - FFT Mode 1k, 2k ,4k, 8k, 16k, 32k (normal or extended) - Bandwidth 5MHz, 6MHz, 7MHz, 8MHz - T2 Frames Number 2~255 - NUM Data Symbols 60 - Network Mode MFN Management - Interface 1 x 10/100 Base-T Ethernet - Connector RJ-45 - Management Easy-to-use Web based GUI Environment - Power AC 220V±10%, 50/60Hz - Consumption 34W - Operating Temperature 0 ~ 45°C - Storage Temperature 20 ~ 80°C - Dimensions 482mm × 410mm × 44mm - Weight 4.8kg