|
TELECOMPONENTS - NEW DSTL6K, 6. KW FM TRANSMITTER
PRODUCT DESCRIPTION
The Medium Power 5 kW and 6 kW FM Transmitters, combine a very compact size (only 4RU ) with TELECOMPONENTS most innovative technologies in terms of efficiency, costs and maintenance.
A reliable solution, performing ease of use, high reliability and simple control.
The standard configuration includes various features, while others are available on request. The Medium Power 5 kW and 6 kW FM Transmitters are provided with the best available technologies developedby Telecomponents laboratories.
Our innovative solutions are carefully designed in order to always guarantee efficiency, reliability and ease of use.
-Maximized Efficiency System (MES)
MES is an intelligent system of automatic regulation of the power devices working point: efficiencies RF/AC up to 85% and reduction of air and electricity consumption.
-Ultimate Audio Quality (UAQ)
UAQ is a sophisticated system that allows to obtain audio quality levels higher than industry standards and the current characteristics of digital modulations.
-Intelligent Air Cooling System (ICS)
ICS is a smart innovation that regulates the amount of cooling air according to the environmental conditions and the needs of the transmitter, reducing energy waste.
MAIN FEATURES:
- Highest overall efficiency ≥73%
- Nominal RF power up to 6000W
- UAQ Ultimate Audio Quality
- High stereo performance typ. 60 dB
- Remote Control through mobile APP
- Web TCP/IP
- 6th LD-MOS generation VSWR 65:1
- Large LCD color display with touch panel
- Ac mains 90-260 VAC extend range with PFC
- CCIR & FCC compliant
OPTIONS:
- DDS Direct Digital Synthesis
- AES/EBU Audio Input
- RDS/RBDS coder
- SNMP V2-V3 remote control
- OIRT and JPN version
- Audio Over IP
- GPS Telemetry
- SFN Reference
- Deep Tropicalization
- DDS Direct Digital Synthesis
- AES/EBU Audio Input
- RDS/RBDS coder
- SNMP V2-V3 remote control
- OIRT and JPN version
- Audio Over IP
- GPS Telemetry
- SFN Reference
- Deep Tropicalization
GENERAL:
- Max Power : 6000 Watt (opt.6300w)
- RF Output Impedance : 50 ohm
- RF Output : Connector 7/8
- Monitor RF : BNC connector
- VSWR : 1,5:1 WITH AUTOMATIC FOLDBACK
- Frequency Range : 87.5 - 108.00 MHz, on request 66 - 74 MHz ( OIRT), 76 - 90 MHz (JPN) Programmable in 10kHz steps
- Frequency Stability : +- ppm from -5 to 45 degree
- Type of Modulation : Analog
- Off Lock Attenuation : ≥ -80 dBc
- Modulation Capability : +-150 KHz
- Limiter built in
- Power Good Detector : adjustable from 20-90% of the power
- Audio Presence Detector : adjustable time from front panel
- External AGC : Automatic, with fine ADJ back panel
- Modulation Mode : Mono, Stereo, Multiplex, SCA, RDS, Aux
- Preemphasis : Flat/50/75μs selectable from front panel
- Asynchronous : AM S/N Ratio -70 dB
- Synchronous : AM S/N Ratio -65 dB
- RF Harmonics : Exceeds EBU/CCIR/FCC requirements
- RF Spurious : Exceeds EBU/CCIR/FCC requirements
MONO OPERATION:
- Input Impedance : 600 ohm - 10 Kohm balanced
-
Input Level : -6 to +12 dBm
- Input Connector : XLR female
- Frequency Response : +-0.1 dB, 20 Hz to15 KHz
- Total Harmonic Distortion + Noise : 0.1% @ 400 Hz
- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio
- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave
- Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave
- FM S/N Ratio : -80 dB +-75 KHz dev.
STEREO OPERATION
- Input Impedance : 600 ohm - 10 Kohm balanced
- Input Level : -6 to +12 dBm
- Input Connector : XLR female
- Frequency Response : +-0.1 dB, 20 Hz to 15 KHz
- Total Harmonic Distortion : + Noise 0.1% @ 400 Hz
- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio
- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave
- FM S/N Ratio : -80 dB below +-75 KHz dev.
- Stereo Separation : 1kHz ≥ -60dB
- Crosstalk attenuation Main to Sub : -70 dB 30 Hz to 15 KHz
- 38 KHz Suppression : ≥ -85 dB
- Pilot Frequency : 19 KHz +-1 Hz
- Output Pilot : 1 Vpp., BNC female
MULTIPLEX OPERATION
- Composite Input Impedance : 2 Kohm unbalanced
- Composite Input Level : -6 to +12 dBm
- Input Connector : BNC female
- Composite Amplitude Response : +-0.1 dB, 30 Hz to 100 KHz
- Total Harmonic Distortion + Noise : 0.1% @ 400 Hz
- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio
- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave
- FM S/N Ratio : -80 dB +-75 KHz dev.
AES/EBU OPERATION
- Input Connector : XLR female, optical TOS-LINK
- Input Impedance : 110 ohm
- Input Level : -20 to +0 dBfs
- Data Format : S/PDF, AES/EBU, IEC958, EIAJCP340/1201
- Sampling Frequency from : 32 to 96 KHz
SCA, RDS, AUX OPERATION
- Input Impedance : ≥ 2 Kohm
- Input Level : -6 to +12 dBm
- Frequency Response : +-0.1 dB, 50 KHz to 100 KHz
- Input Connector : BNC female
AUXILIARY CONNECTIONS
- RS485 DB9 connector back panel
- Telemetry Interface connector DB25 back panel
- LAN RJ45 connector back panel
- MPX OUT connector BNC back panel
OPTIONS
- AES/EBU -SPDIF
- RDS/RBDS Programmable Coder via PC
- OIRT or JPN version
- SNMP v2-v3
- Audio Over IP
- DDS Direct Digital Synthesis
- SFN Reference
- AC Input Power : 90 -260 VAC 1phase, 180-400 VAC 50/60 HZ 3phase
- AC Apparent Power Consumption : 6800VA @ 5kW, 8200VA @ 6kW
- Cos ∅ : > 0.98
- Cooling : Forced air
- ENVIRONMENTAL Operating temperature : -10 degres C to +50 degres C
- Max Operating Altitude : 4500 mt
- Relative Humidity Range : 0 to 90%
PHYSICAL DIMENSION
- Mounting Standard 19 chassis 4 U rack
- Size : W x 570 mm. D x 450 mm. H x 176 mm
- Weight : ~ 30 Kg
For datasheet, shipping cost and delivery time before call us.
We recommend that, for the high powers involved, the transmitter installation should be made by qualified technicians.
The price is for mono version and standard power amplifier modules.
Datasheet :
pdf/Telecomponents DSTL 6 Kw FM-TRANSMITTER-
|
