ADI MX1 Satellite decoder - USED The MX1 Single MPEG-2 integrated receiver decoder is designed to reduce cost and satisfy video, audio, and data requirements of digital broadcast television, cable and satellite operations. The MX1 integrated receiver decoder is a fully interoperable decoder for digital media networks that complies fully with the DVB MPEG-2 standard. It decodes program services provided by up to four selected transport stream inputs. The decoder supports a large number of applications. Inputs come from the following sources: Satellite-QPSK DVB/ASI Outputs include the following: Analog video Analog audio Embedded SDI & Non Embedded SDI AES/EBU ASI The decoder supports full transport stream (TS) decryption and is compatible with all conditional access (CA) modules. Depending on the hardware configuration, the decoder can also provide embedded CA. Two slots for Conditional Access Modules (CAM) are provided in the front panel to enable decryption of received signals and transmission of the signals in the clear to customers. Depending on the hardware configuration, additional slots are provided in the rear for the insertion of smart cards (SC) used for the embedded decryption function. Other applications of the decoder include the following: Program Identification (PID) filtering and retransmission Digital Turnaround (DTA) and video monitoring Control and monitoring through IP. In remote mode, all decoder functions can be operated remotely from a PC under MS-WINDOWS through the IP interface. In addition to an RS232 or RS422 communication port, the MX1 can provide a General Purpose Interface (GPI) via a 9-pin D-type connector that allows dry contact alarms. The GPI depends on the hardware configuration. In local mode, all decoder functions can be operated through a two-line LCD window and six buttons on the front panel. The MX1‐ Multi‐Channel MPEG 2 Single Decoder‐ Operation Manual